Toshiba TLP-X150 - Specifications; Separately Sold Product

64
65
Others
If This Happens Check
Remote control
doesn’t work
Is the remote control code identical with the projector’s code?
p.41
Are the remote control’s batteries drained?
Are the batteries inserted into the remote control correctly?
p.19
Is the remote control being used within the effective range?
p.19
Are there any obstructions between the remote control and
projector?
Are there any fluorescent or other bright lights directed at the
projector’s infrared remote sensor?
•
•
•
•
•
•
USB device
images aren’t
projected
Is the USB memory device inserted correctly?
Is a USB memory device not supported by the projector inserted?
p.47
Are there any JPEG files saved on the USB memory device?
Are the files in an unsupported format or too large for the
projector?
Convert them with the supplied software application.
p.52
•
•
•
•
Specifications
List of general specifications
Item Specification
Consumption Power 270 W
Weight 1.8 kg
External Dimensions
(including protruding parts)
272 × 82 × 189 mm (W × H × D)
Cabinet material PC+ABS resin and PC resin (Some parts including MG alloy)
Conditions for usage environment
Temp: 5°C to 35°C; relative humidity: 30% to 70%
LCD Panel
Display method 3-panel transmission
Panel size 0.63 type
Drive system TFT active matrix
Picture elements 786,432 pixels (1024 H × 768 V)
Lens F=1.7 ~ 1.87 f=19.2 ~ 23.00 mm
Lamp High-pressure mercury lamp (180 W)
Projection screen size 30-300 inches
Projection distance 0.89 m ~ 10.93 m
Speaker 1 W (Mono)
Connection terminal
COMPUTER1 IN terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use)
COMPUTER 2 IN terminal
Mini D sub 15 pin
RGB / Y/PB/PR / MONITOR OUT (multiple use)
S-VIDEO terminal Mini DIN 4 pin
VIDEO terminal RCA Pin Jack, 1 V (p-p), 75
Ω
AUDIO IN terminal
3.5 mm diameter stereo mini-jack: 1.5 V (rms), 22 k
Ω
or more
COMPUTER 1 IN, 2 IN/VIDEO/S-VIDEO (multiple use)
AUDIO OUT terminal 3.5 mm diameter stereo mini-jack
CONTROL terminal D sub 9 pin (RS-232C)
USB terminal
USB 1.1 Full-speed compliant Type A;
Output voltage: +5 VDC; Supply current: 500 mA
Notes
This model complies with the above specifications.
Designs and specifications are subject to change without notice.
This model may not be compatible with features and/or specifications that may be added
in the future.
Separately sold product
Replacement Lamp Model : TLPLW21

•
•
•

Troubleshooting (Continued)