Toshiba TOSVERT VF-AS3 Manual

E6582051
- 8 -
2.2. PROFINET
This product supports the cyclic command transmission and monitoring by the “PROFIdrive” profile and 3
vender profile.
• Telegram1: PROFIdrive
• Telegram100: 4 PKW and 2 PZD format.
• Telegram101: 4 PKW and 6 PZD format.
• Telegram102: 6 PZD format.
This product also supports The PROFIdrive parameters channel.
2.3. Modbus TCP
This product supports the following Modbus services.
• 03 (0x03): Read Holding Registers
• 06 (0x06): Write Single Register
• 16 (0x10): Write Multiple Registers
• 43 (0x2B): Read Device Identification
2.4.
PROFINET and Ethernet Features
This product supports the following functions.
• Automatic IP address assignment via DHCP and DCP
• Support of MRP (Media Redundancy Protocol)
• Support of LLDP (Link Layer Discovery Protocol)
• Diagnostics and configuration via integrated Web server
2.5.
Web server
This product supports the following functions on Web server
• Drive monitor
• Drive parameters
• Network parameters
•Administration
•TCP/IP statistics
•Modbus statistics

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m