Toshiba TOSVERT VF-AS3 Manual

E6582051
- 9 -
2.6.
LED indicator
The LED shows the present status of the network and module.
When PROFINET option is mounted to VF-AS3, please attach the LED label for PROFINET option to lower
side of communication indicator of VF-AS3.
The LED label is included in danger label kit of VF-AS3.
SF (Network status) and BF (Module status) are displayed on communication indicator.

The behavior of LNK LED
Link Activity
Color and behavior Meaning
OFF
No link
Green Blink Network Activity at 100 Mbps
Green ON
Link established at 100 Mbps
SF
LNK
BF
LNK

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m