Toshiba TOSVERT VF-AS3 Manual

E6582051
- 15 -
3.1.2. Mounting of option for VF-AS3
3.1.2.1. Mounting of option
1. Insert option into option slot A of VF-AS3.
*Note:Insert the option straightly and slowly along the guide inside option slot A.
Follow this instruction, the connecter can become damaged.
3.1.2.2. Removing of option
1. Remove an option in the direction of arrow ② while pushing the release tab in the direction of arrow ①.
Option slot A
Release tab
①
②

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m