Page 77
1
2
3
4
5
6
7
In this dialoge box section:
Point 1: You can define project name or can keep “Untitle” as default.
Point 2: You can define path for the project to be saved.
Point 3: You can mention any special note; if required.
Point 4: You can define author name.
Point 5: You can define “password” for the project you created.
Point 6: You can see the information of the model selected.
Point 7: You can see the image of the model you selected.
Note: Point 6 and 7 will appear with all tabs of “Project Configuration” docker.
3. Press “OK” button.
You can see a application window listing information as Logic blocks, tasks, tags and Network Configuration.
After setting macro level parameters from these project items, your application is ready for downloading.
To Next Page
Loading...
