Page 81
M00021 Clock/calendar illegal
value warning
Read Only ON when clock/calendar data is illegal
Retentive data invalid warning
ON when retentive data in RAM are invalid
ON when the scan time exceeds 200ms (default)
System timer coil for 0.1
Toggle at 50 % duty cycle
System timer coil for 0.2
Toggle at 50 % duty cycle
System timer coil for 0.4
Toggle at 50 % duty cycle
System timer coil for 0.8
Toggle at 50 % duty cycle
Toggle at 50 % duty cycle
System timer coil for 2
sec interval
Toggle at 50 % duty cycle
System timer coil for 4
sec interval
Toggle at 50 % duty cycle
Toggle at 50 % duty cycle
Timer interrupt ladder
execution status
ON when Timer program is executing
IO1 interrupt execution status
ON when IO1 program is executing
IO2 interrupt execution status
ON when IO2 program is executing
To Next Page
Loading...
