Toshiba Vm Series Operating Instructions (Functional Manual)

Unified Controller Vm series Controller typeS / typeL Virtualization Functional Manual
xi
●Manuals of Vm series
In addition to this manual, there are the following as manuals of the Vm series.
・Unified Controller Vm Series Controller unit Instruction Manual
(6F8C1645)
It describes the summary of CPU module (PUB11/PUB21) and the basic part controller unit.
It describes the information necessary for setting and operation and maintenance check.
・Unified Controller Vm Series Controller typeS CPU Functional Manual
(6F8C1652)
It describes the function and the usage of CPU module of typeS.
It describes the information necessary to make a user's program.
・Unified Controller /Integrated Controller Programming Instructions
(6F8C1226)
It describes the specification details of each command about program languages (LD, FBD, SFC
and ST) supported by Unified Controller and Integrated Controller.
・Unified Controller /Integrated Controller Engineering Tool 4/5 -Basic-
(6F8C1290)
It describes how to create and debug programs, print on paper and save data by nV-Tool.
・Unified Controller Engineering Tool 5 -Setup-
(6F8C1627)
It describes how to set up nV-Tool.
・ Unified Controller Vm Series Controller typeS / typeL Virtualization
Functional Manual
(6F8C1657)
It describes the virtualization function of typeS / typeL controller.
・Unified Controller Vm Series Controller typeL CPU Functional Manual
(6F8C1723)
It describes the function and the usage of CPU module of typeL.
It describes the information necessary to make a user's program.

Toshiba Vm Series Specifications

General

Brand	Toshiba
Model	Vm Series
Category	Controller
Language	English