Toshiba Vm Series - Replacing the TNB Module; TNB Module Replacement Procedure

To Next Page

To Previous Page

Chapter 2 How to setup Windows

6F8C1657

Select the [Enable] on the

displayed screen and click the

[OK] button to activate the

setting.

Click the start button and

click the [Power] button

displayed above the start

button.

Make sure that you can not

select Shutdown or Restart.

Figure 2.2 Disable Shutdown

◆

Note

If you shut down or restart after disabling shutdown, explicitly execute the corresponding

command on the command prompt as follows.

Shutdown ：shutdown /s

Restart ：shutdown /r

Other manuals for Toshiba Vm Series