Toshiba Vm Series Operating Instructions (Functional Manual)

Unified Controller Vm series Controller typeS / typeL Virtualization Functional Manual
v
Mandatory
Turn on the power in the following
order:
Turn on the power of the Vm series,
and then turn on the I/O module
supply external power and external
load power.
If this order is not followed, it may cause
an accident or damage to the machine
due to malfunction.
Mandatory
For system safety, turn off the load
power before the power of the Vm
series.
If this order is not followed, it may cause
an accident or damage to the machine.
Share the external power supply for the
I/O module with the load power supply
whenever possible. If this is not possible,
construct the system so that the external
power supply and load power supply are
turned off simultaneously.
4. Safety Precautions in Maintenance and Inspection
WARNING
Mandatory
When installing or removing the
module, unit, terminal block, or
wiring cable, make sure that the
external power supply is off.
Otherwise, there will be live electric poles
on the back of the external terminal block
of the module, causing an electric shock.
Prohibited
Do not connect the battery in
reverse, charge, disassemble,
overheat it, throw it into fire, or short-
circuit it.
It may cause an explosion or fire.
Mandatory
When replacing the power fuse or
alarm fuse of the device, turn off the
device.
Otherwise, it may cause an electric
shock or fire.
Mandatory
Replace fuses or batteries with
specified items.
Using anything other than specified may
cause a fire or failure.
Mandatory
Be extremely careful when
measuring the power supply voltage
at the power terminal part of the
module during an inspection.
Otherwise, it may cause an electric
shock.

Toshiba Vm Series Specifications

General

Brand	Toshiba
Model	Vm Series
Category	Controller
Language	English