Operating Manual
69-2267EFS—03 8 570-213
ENGLISH
To adjust program schedules
1. Press PROG, then EDIT.
2. Press day buttons (MO-SU) to select day(s).
3. Press s or t to set Period 1 time for
selected day(s).
4. Press s or t to set Heat and Cool
temperature for this time period.
5. Press other time periods (Period 2, Period 3, Period
4) to set time and temperatures for each.
6. Press DONE to save & exit (or press CANCEL to exit
without saving changes).
Note: You can press CANCEL PERIOD to eliminate any unwanted
time period.
Note: Press FAN to customize fan settings for any time period
(see page 5).
SET HEAT/COOL
LEVELS
SELECT DAY(S)
SET TIME FOR PROGRAM
PERIOD TO START
PRESS EDIT
To Next Page
Loading...
