P340 Series
570-213 5 69-2267EFS—03
ENGLISH
Press FAN to select fan operation, then press DONE.
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings you’ve
programmed for different time periods (see page 8).
If you select On or Circ, the setting you select will
remain active until you press FAN again to select Auto
(see page 22 for more information).
Fan setting
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
M29099
PRESS FAN
To Next Page
Loading...
