TOTALINE Deluxe 1H - Wallplate Installation

Installation Guide
69-2268—03 2 570-219
M29130
WALL OPENING
WALL ANCHORS (2)
(PROVIDED WITH
THERMOSTAT)
WALL
DRILLED
HOLES (2)
MOUNTING
SCREWS (2)
WIRE
Wallplate installation
1. Separatewallplatefromthermostat.
2. Mountwallplateasshownbelow.
MERCURY NOTICE
Ifthisproductisreplacingacontrolthatcontainsmercuryinasealedtube,donot
placetheoldcontrolinthetrash.Contactyourlocalwastemanagementauthorityfor
instructionsregardingrecyclingandproperdisposal.
CAUTION: ELECTRICAL HAZARD
Cancauseelectricalshockorequipmentdamage.Disconnectpowerbefore
beginning installation.
Drill3/16”holesfordrywall.
Drill7/32”holesforplaster.
Must be installed by a trained, experienced technician
• Readtheseinstructionscarefully.Failuretofollowtheseinstructions
candamagetheproductorcauseahazardouscondition.
M29131
Grasptopand
bottomofwallplate
andpulltoremove
fromthermostat.