END USER SETTINGS – DATE/TIME
DEFINITION
DEPENDENCIES FUNCTION
The “Date Adjust Screen” and “Time Adjust
Screen” is used to allow the end user access
to change or view date and time on the
thermostat. Switching between the Date
Adjust Screen and the Time Adjust Screen is
done with the green icon button at the right
side of the screen
None When the thermostat is first registered and connected
to a Wi-Fi router, both the date and time will be
synced with the server (based on the geolocation of
the phone/tablet used to connect the thermostat to a
router or based on the ISP location if a PC is used to
connect the thermostat to a router). The time & date
will be updated/synced at the top of each hour
automatically, unless the “Sync Time To Server”
option in the Settings – Advanced screen is set to
“NO”.
19
To Next Page
Loading...
