TOTALINE P474-0130 - Test Operation

INSTALLATION INSTRUCTIONS
Page 19
Step #6
Test Operation
Adjust the Slide Switch until it is located
under the word HEAT on the thermostat.
Press the Up or Down buttons until the set
temperature is 10 degrees above room
temperature. The HVAC unit should
energize in the heating mode (pages 5-6).
Adjust the Slide Switch until it is located
under the word COOL on the thermostat.
Press the Up or Down buttons until the set
temperature is 10 degrees below room
temperature. The HVAC unit should
energize in the cooling mode (pages 5-6).
Turn on the power to the Heating/Air
Conditioning system.
Adjust the Slide Switch until it is located
under the word OFF. Adjust the other slide
switch until it is located under the word Fan
On. The fan should turn on and run
continuously (pages 5-6).
72
TOTALINE
Heat
Off
Cool
Fan On
FanA uto
72
TOTALINE
Heat
Off
Cool
Fan On
FanA uto
72
TOTALINE
Heat
Off
Cool
Fan On
FanA uto
72
TOTALINE
Heat
Off
Cool
Fan On
FanA uto