HOLIDAY MODE — The Holiday button places the thermostat into Holiday
mode. During Holiday mode, the unoccupied set points are enforced. The
number of days the thermostat will be in Holiday mode can be set.
Set Clock — The Set Clock button allows the user to change the time and
day displayed on the thermostat. Press the Set Clock button to enter Set Time
mode. See Fig. 4. The current time will blink on and off. Press the UP
ARROW and DOWN ARROW buttons until the correct time is shown. Hold
down the buttons to quickly move through the time display. Hold down the
Fan button while pressing UP or DOWN ARROW to scroll through by hours.
TheAM and PM annunciators will automatically change. To ensure the sched-
ules are properly followed, make sure that AM or PM is correct for the time
chosen. When the correct time is shown, press the Mode button to modify the
day of the week. The current day will blink on and off. Press the UPARROW
and DOWN ARROW buttons until the correct day is shown. Press the Set
Clock button again to exit the Set Time mode.
Programming Thermostat Schedules — Before programming the ther-
mostat, plan the thermostat daily schedule. The schedule is divided into
7 days (Monday through Sunday). Each day can have 2 (Occupied 1, Un-
occupied), 3 (Occupied 1, Occupied 2, Unoccupied), or 4 (Occupied 1, Oc-
cupied 2, Occupied 3, Unoccupied) time periods. Each occupied time period
has a start time, stop time , heating set point, and cooling set point. The un-
occupied time period has a heating set point and a cooling set point.
Fig. 4 — Setting the Clock
7
To Next Page
Loading...
Need help?
General
