7. The Start Time for Occupied 1 will be displayed. Use the UP ARROW
and DOWN ARROW buttons to raise or lower the time until the desired
Start Time is shown. Press the Mode button to continue. See
Fig. 6.
8. The Stop Time for Occupied 1 will be displayed. Use the UP ARROW
and DOWN ARROW buttons to raise or lower the time until the desired
Stop Time is shown. Press the Mode button.
9. The On/Off icon will be displayed. Use the UP ARROW to turn the Oc-
cupied 1 period ON for this day. Use the DOWN ARROW to turn the
Occupied 1 period OFF for this day.
Fig. 5 — Setting Occupied 1 Set Points
Fig. 6 — Start Time Display
9
To Next Page
Loading...
