26 27
Operation
ENERGY SAVER 1/2
1.
AUTO ENERGY SAVER+
2. TIMER SAVER
SELECT
[●ENTER] PUSH
T im er energ y
s av er
Select [6H], [9H]
or [OFF]
4
Press
A u to energ y
s av er+
Select
[ON] or [OFF]
4
Press
Press
E nerg y S av er F eatu res
How to Set
T u rning of f energ y
s av er
Select [OFF] in step
in each procedure on the left
(Example: "Timer energy saver")
4
Remote control back side
Move the frame.
Select the setting.
Confirm the
setting.
Menu,Return button
Set the "Timer energy saver"
at the time you want to start it.
CAUTION
During setting, the display goes out
when no button is pressed within
about 60 seconds.
If you fail to complete the setting,
redo from the step 1.
When energy saver is set,
the "Energy saver" LED
(green) lights up.
<Energy saver>
Select
[AUTO ENERGY
SAVER+]
3
Select
[TIMER SAVER]
3
Press
Select
[ENERGY
SAVER]
1
2
Press
MENU 2/6
1. MANUAL CLEANING
2. ENERGY SAVER
SELECT
[●ENTER]PUSH
MENU 1/6
1. MANUAL CLEANING
2. ENERGY SAVER
SELECT
[●ENTER]PUSH
ENERGY SAVER 1/2
1.AUTO ENERGY SAVER+
OFF
SELECT
[●ENTER]PUSH
ENERGY SAVER 2/2
1.AUTO ENERGY SAVER+ OFF
2.TIMER SAVER
SELECT
[●ENTER]PUSH
AUTO ENERGY SAVER+ ON
TIMER SAVER OFF
TIMER SAVER ON
ENERGY SAVER 1/2
1.AUTO ENERGY SAVER+
ON
SELECT
[●ENTER]PUSH
(To return
)
(To return
)
(To return
)
■ To change the timer energy
saver time:
Set the timer energy saver again
at the time you want to start it.
Press
TIMER SAVER 1/1
1.TIMER SAVER
OFF
SELECT
[●ENTER]PUSH
TIMER SAVER 1/1
1.TIMER SAVER
6H
SELECT
[●ENTER]PUSH
To Next Page
Loading...
Need help?
General