11
COMBO COOK FUNCTION
This unit Is equipped with a unique
Combo Cook function, accessible from
the Steam mode function selection
panel. In this mode, the unit will combine
the air frying and steaming functions
within a single cycle, easily creating
succulent and nutritious meat, fish or
vegetable meals.
NOTE: Before using the Combo Cook
to allow steam to be produced.
To start a combo cooking cycle, carry out
the following steps:
1. Touch the ‘Steam’ key on the unit’s
control panel to select Steam mode.
The Steam mode control panel will
light up to show this mode has been
selected.
2. Once the Steam Mode function
selection panel has been activated,
touch the Combo Cook key. The Combo
function’s default time and temperature
will be displayed on the unit’s control
panel to show this mode has been
selected.
3. If necessary, adjust the cooking
time and temperature, as detailed
in the corresponding section of this
instruction manual.
4. Once Combo Cook mode has been
selected, press the
key to launch
the cooking cycle. The unit will now
automatically alternate between
Air Frying and Steaming mode, as
appropriate.
FILLING THE WATER TANK
1. To use any of the steam programs, begin
tank and pull it up and away from the
main body of the unit, then unscrew the
water tank valve by turning it counter-
clockwise until it detaches.
2. Once the water tank valve has been
removed, carefully pour water through
the corresponding hole until the tank is
3.
water, replace the water tank valve
secured into place, then place the water
tank back onto its corresponding slot at
the top of the unit.
To Next Page