17
WARNING! Do not immerse the appliance
in water or any other liquid.
NOTE: Clean the appliance after every use.
GENERAL CLEANING
AND CARE
1. Switch off the appliance, remove the
mains plug from the wall socket and let
the appliance cool down.
NOTE: Keep the drawer open to let the unit
cool down more quickly.
2. DO NOT use metal kitchen utensils or
abrasive cleaning materials to clean the
drawer, as this may damage the non-
stick coating.
3. Clean the drawer with hot water, some
washing-up liquid and a non-abrasive
sponge or brush.
TIP: If food residue is stuck to the bottom
of the drawer, leave it to soak in hot water
and some washing-up liquid for a few
hours or overnight.
4. Wipe the outside of the appliance with
a damp cloth.
5. Wipe the inside of the appliance with
hot water and a non-abrasive sponge.
6. Clean the heating element with a
cleaning brush to remove any food
residues.
7. Ensure all parts are thoroughly dry
before use.
CLEANING AND CARE
THE SELF CLEANING FUNCTION
• This unit is equipped with a self-
cleaning function, which helps ensure
the unit remains clean and in optimal
functioning condition.
• To enable the self-cleaning function,
touch the corresponding key on the
Steam Cooking control panel. Press
and the unit will automatically begin
to carry out a self-cleaning cycle with
the default settings (30 minutes at 100
degrees.
NOTE: When running a self-cleaning cycle,
and cannot be adjusted.
THE PUMP WATER FUNCTION
• This unit is equipped with a Pump
Water function, which helps dispose of
any excess water left in the tank after a
self-cleaning cycle.
• To enable the Pump Water function,
touch the corresponding key on the
Steam Cooking control panel. Press
and the unit will automatically begin to
pump water into the drawer for a period
• Once the cycle has complete empty
the drawer ensuring its free of water.
NOTE: When running a self-cleaning cycle,
and cannot be adjusted.
To Next Page