9
PREPARING FOR USE
1. Remove your appliance from the
packaging.
2. Check that there is no damage to the
cord or any visible damage to the body.
3. Check that all listed parts are present.
4. Remove any stickers or labels from the
appliance. DO NOT remove the rating
plate or any warnings.
5. Dispose of the packaging in a
responsible manner.
6. Locate the appliance on a stable,
horizontal, even and heat-resistant
surface in accordance with the
Important safety information section.
7. Thoroughly clean the drawer and grill
plate with hot water, some washing up
liquid and a non-abrasive sponge.
8. Wipe the inside and outside of the
appliance with a moist cloth.
9. DO NOT
frying fat or any other liquid. This is an
oil-free fryer that works on hot air.
10. Place the grill plate in the drawer.
11. DO NOT put anything on top of the
and the hot air frying will be affected as
a result.
AIR FRYER DRAWER
SAFETY SWITCH:
For your safety, this air fryer contains
a safety switch in the drawer designed to
keep if from accidentally turning on when
the drawer is not properly situated inside
the appliance. Before using the air fryer,
please ensure that the drawer
is fully closed.
TURNING THE APPLIANCE ON
1. Plug the unit into a mains socket. There
will be a sound prompt and the
key
show the unit has been powered on.
2. Once the unit is plugged in, touch the
key on the unit’s control panel to turn
it on. The , +/-, mode selection, Temp
and Time keys on the unit’s control
panel will illuminate to show it has been
turned on.
NOTE: The unit will also emit a sound
prompt when it is disconnected from
the mains. This is a normal feature of
the appliance, and not indicative of
malfunction.
AUTO-OFF FUNCTION
1. When cooking is not in progress,
the appliance will automatically go
into Standby mode if there has been
no contact with the control panel
for 1 minute. The
key will remain
all other indicators as well as the LED
display will go out to show the unit is in
Standby mode.
2. Touch the
key while the unit is in this
state to bring it out of Standby mode.
The indicators on the unit’s control
panel will light up to show the unit has
been taken out of Standby mode
BEFORE FIRST USE
To Next Page
Loading...
