18
EMPTYING THE WATER TANK
NOTE: Ensure the water tank is emptied
after every use, or whenever the unit will
not be used for prolonged periods of time.
• To clean the water tank, detach it from
the main body of the unit, unscrew the
water tank valve by turning it counter-
clockwise, and pour out the excess
water onto a sink or equivalent surface.
• Alternatively, use the Pump Water
function to remove excess water from
the tank. Refer to the corresponding
section below for guidance on how to
use the Pump Water functionality.
EMPTYING THE EXCESS STEAM
COLLECTOR POT
• This unit is equipped with a steam drip
tank on the back of the unit, which
collects excess water generated during
the steam cooking process. This tank
should be emptied after every use.
• To empty this tank, grip it by the
protruding tabs on either side and
carefully manoeuvre it loose. Be careful
not to exert excessive force, as this
could damage the tank.
• Once the steam drip tank has been
removed from the unit, turn it upside
down to dispose of any collected water,
then place it back onto its slot at the
back of the unit. Take care to ensure the
attempting to use the unit for steaming.
EMPTYING THE WATER
DRIP TRAY
• This unit is equipped with a drip tray,
which collects water when using the
steam function. This tank should be
emptied after every use.
• To empty this tank, pull it out from its
slot at the bottom of the unit until it
fully detaches. Be careful not to exert
excessive force, as this could damage
the drip tray or unit.
• Once the steam drip tank has been
removed from the unit, carefully tip it
forward to dispose of its contents, then
place it back onto its slot at the bottom
of the unit until it slides into place. Take
secured into place before attempting to
use the unit for air frying.
STORING YOUR APPLIANCE
• Ensure that the appliance is cool, clean
and dry before storing.
• Store the appliance in a cool and dry
place.
To Next Page
Loading...
