Toyota 3VZ–FE User Manual

(b) Adjust the PS drive belt.
(See SR section)
Drive belt tension:
New belt
150–185 lb
Used belt
115±20 lb
(c) Adjust the ignition timing.
(See IG section)
Ignition timing:
10° ± BTDC @ idle
(w/ Terminals TE1 and E1 connected)
41. INSTALL ENGINE UNDER COVERS
42. INSTALL HOOD
43. PREFORM ROAD TEST
Check for abnormal noise, shock, slippage, correct shift
points and smooth operation.
44. RECHECK ENGINE COOLANT AND ENGINE OIL LEVELS
–ENGINE TROUBLESHOOTING ENGINE MECHANICAL
EG–137

Toyota 3VZ–FE Specifications

General

Engine Type	V6
Bore	87.5 mm (3.44 in)
Compression Ratio	9.6:1
Torque Output @ RPM	4400 rpm
Valvetrain	DOHC, 4 valves per cylinder
Block Material	Cast Iron
Head Material	Aluminum
Displacement	3.0 L
Stroke	82.0 mm (3.23 in)
Fuel System	Multi-port fuel injection
Bore x Stroke	87.5 mm x 82 mm (3.44 in x 3.23 in)