Toyota 8FGCU25 User Manual

Accelerator
pump nozzle
Main passage plug 1
Accelerator pump nozzle and outlet check valve removal
(1) Accelerator pump nozzle
(2) O-ring
(3) Spring
(4) Steel ball
Slow jet removal
Idle-up actuator removal
(1) Remove set screws and the idle-up actuator.
Main jet removal
(1) Remove the main passage plug and gasket.
(2) Remove the main jet and gasket from the main passage
plug hole.
Accelerator pump diaphragm removal
(1) Remove set screws, and remove the accelerator pump
cover.
(2) Remove the diaphragm and spring.
Throttle adjusting screw removal
(1
) Throttle adjusting screw
(2) Spring
4Y-E Repair
Section 1.1.4

Toyota 8FGCU25 Specifications

General

Load Capacity	5000 lbs
Lift Height	189 inches
Power Source	Internal Combustion
Fuel Type	Gasoline/LPG
Operator Type	Seated
Lift Speed (loaded/unloaded)	122 fpm
Lowering Speed (loaded/unloaded)	98 fpm / 98 fpm
Mast Height (lowered/raised)	83 inches
Weight	3, 500 kg