What to do if the engine does not respond to the accelerator pedal on Toyota 8FGCU25?
If your Toyota Forklifts engine isn't responding when you press the accelerator pedal, the issue might stem from the injection pump. Try servicing or replacing the injection pump to resolve this.
Why does the idle speed deviate from the specified value in Toyota 8FGCU25?
If your Toyota Forklifts idle speed is off, it might be the injection pump. Try adjusting the idle set screw to fix it.
What to do if the idle up speed does not rise on Toyota 8FGCU25?
If the idle up speed on your Toyota Forklifts isn't increasing, the problem might be with the injection pump. Addressing this involves servicing the injection pump, which may include applying grease, etc.
How to fix the idle switch open error on Toyota 8FGCU25 Forklifts?
If you're getting an idle switch open error on your Toyota Forklifts, it might be related to the injection pump. Replacing the return spring might solve the problem.
General| Load Capacity | 5000 lbs |
|---|---|
| Lift Height | 189 inches |
| Power Source | Internal Combustion |
| Fuel Type | Gasoline/LPG |
| Operator Type | Seated |
| Lift Speed (loaded/unloaded) | 122 fpm |
| Lowering Speed (loaded/unloaded) | 98 fpm / 98 fpm |
| Mast Height (lowered/raised) | 83 inches |
| Weight | 3, 500 kg |
To Next Page
