Toyota 8FGU30 User Manual

I
Hose
\ Ventilation
I Ventilation valve
REMOVAL
1. Remove the hose between the ventilation valve and the
throttle body.
2.
Remove the ventilation valve from the cylinder head cover.
INSPECTION
1.
lnspection of the ventilation valve
Shake the ventilation valve with your hand, and inspect
whether the rattling sound can be heard.
If you can hear the rattling sound, then it is normal.
2. lnspection of the PCV device rubber hose
Inspect for any damages, cracks or deterioration on the PCV
device rubber hose.
lf there are any abnormalities, replace
with a new one.
INSTALLATION
The installation procedure is the reverse of the removal procedure.
4Y-E Repair
Section 1.1.6

Toyota 8FGU30 Specifications

General

Model	8FGU30
Category	Forklifts
Fuel Type	Gasoline/LPG
Tire Type	Pneumatic
Load Capacity	6, 000 lbs
Lift Height	187 in
Overall Width	1220 mm
Turning Radius	2400 mm
Engine Power	58 hp (43 kW)
Mast Height	83 in
Overall Length	3200 mm
Overall Height	83 inches (with standard mast)
Wheelbase	1600 mm
Travel Speed (Full/No Load)	12.4 mph