10.6. Disconnect a connected device
This feature disconnects the Bluetooth® link to a connected device. The device remains
paired with the hands-free system.
1 Press the Multi-function button.
The system responds: Phone/Setup menu. {Say a command}.
2 Say Disconnect <device name>, where <device name> is the friendly name for the
device you want to connect. For example ‘Disconnect Jenny’s Phone’.
The system responds: Disconnecting <device name>.
Upon successful completion, the system responds: Disconnection complete.
ó Note: Pressing and holding the End button disconnects all the connected devices.
10.7. Remove a paired device
This feature removes a device from the device list. The device will no longer be paired
with the hands-free system. To reconnect the device, the pairing procedure must be
redone.
1 Press the Multi-function button.
The system responds: Phone/Setup menu. {Say a command}.
2 Say Remove <device name>, where <device name> is the friendly name for the device
you want to remove. For example ‘Remove Jenny’s Phone’.
The system responds: Removing <device name>. Are you sure?
3 Say Yes.
Upon successful removal, the system responds: Device Removed.
10.8. Remove all paired devices
1 Press the Multi-function button.
The system responds: Phone/Setup menu. {Say a command}.
2 Say Remove All Devices.
The system responds: Are you sure, you want to remove all devices?
3 Say Yes.
Upon successful removal, the system responds: All Devices Removed.
To Next Page
Loading...
