6. Getting started
Once your hands-free system is professionally installed, use these procedures to get
started.
6.1. Set your language
ò Caution: When you change your hands-free system’s language, all contacts in your
Contacts list and devices in your Device list are deleted.
1 Turn o the vehicle ignition and wait for 15 seconds.
2 Press and hold the End button, turn on the vehicle ignition, and continue holding
the End button and wait till the hands-free system enters language selection and
responds: Language Menu. Press volume up or down to change language.
3 Press the Volume Up and Volume Down buttons to scroll through the language
choices.
As you scroll to a language, the hands-free system plays the prompt for that
language. (For example: American English. To choose this language, restart the vehicle.)
4 When you have selected the desired language, turn o the vehicle ignition and wait
for the UIM Multi-function button to go o.
5 Turn on the vehicle ignition.
6.2. Connect your device
to the hands-free system
Before you can make a hands-free call or stream music*, you must establish a Bluetooth®
connection between your Bluetooth® device and the hands-free system with a paired
link.
When you set up a paired link, the hands-free system remembers your device. Once the
hands-free system and device are paired, your hands-free system automatically connects
to your device every time you start your vehicle.
This hands-free system supports paired links with up to 4 devices.
m
Warning: For safety reasons, it is recommended that pairing be done while the
vehicle is stationary.
* On some models.
To Next Page
Loading...
