Phone voice commands cannot be used
— a “voice tag” may not be set up for the number you want to dial. Follow your handset
device’s user manual to set up voice dialing
— most handset devices will prompt with a beep to indicate it is now time to speak.
Wait until the beep has ended before speaking. Do not over speak the beep.
If the handset device is in silence/vibrate mode, the beep may not be heard.
My phone has a music player, but I can’t hear music*
— the entertainment system set to the correct input to hear music. In most cases that
would be the AUX input.
I have one Bluetooth® music device paired and operating, but I cannot connect a
second device*
— certain Bluetooth® music adapters can interrupt the pairing process and prevent the
pairing of any other devices. If this occurs, turn o the music adapter/device, and
then attempt to pair the next Bluetooth® device. Once the next Bluetooth® device is
paired, turn the music adapter back on so that it can connect again.
When my phone connects to the system the music player starts automatically on my
phone. I do not want this
— set autoplay music to o for your phone.
* On some models.
To Next Page
Loading...
