Toyota DVR - 7.2 System Settings

To change the settings of recording, press > Video Recording
a.Video Resolution
Sets the video resolution of the video to either FHD (1920 x 1080p)
or HD (1280 x 720p).
b.Exposure Value
Sets the exposure level to adjust the brightness of the image. When
the rear camera is connected, you can select Front Camera or Rear
Camera to set the value separately.
c.G-Sensor
Sets the sensitivity level of the G-Sensor that allows automatic triggering
of the emergency recording while normal recording is in progress.
d.Stamps
Sets the information (Coordinates or G-Sensor) that will be displayed on
the recorded video. Select Hide all and the information will not be
displayed.
e. Vehicle Speed Stamp
Displays the driving speed on the recorded video.
f. Text Stamp
Displays customizable text information.
System Settings
To change the system settings of DVR, press > System
a. Date/Time
Sets the date and time fromm two options:

GPS
The system will set the date and time based on GPS location.

Manual
The system will display the date and time setting screen. Press
or to adjust the value of the selected field; press
And repeat the step until all fields have been changed. When
done, press
Please read this manual for proper operation and keep it for future reference.
20/22
AVANZA - MAY - 2019 - 001
SECTION 7.1
Lane Departure Warning System <LDWS>
7.2