223
3
3-1. Instrument cluster
Vehicle status information and indicators
Vehicle settings and the content
displayed on the head-up display
can be changed by using the meter
control switches. (P.206, 217)
1 Operate the meter control
switches and select on the
multi-information display.
2 Operate or of the meter
control switches and select
“HUD Main” to set up the follow-
ing items.
■ Enabling/disabling the head-
up display
Press to enable/disable the
head-up display.
■ Changing the head-up display
settings
Press and hold to display the
setting screen and change the fol-
lowing settings:
Brightness and vertical position
of the head-up display
Select to adjust the brightness or verti-
cal position of the head-up display.
Display content
Select to change the display between
the following:
• No content
• Hybrid System Indicator
• Tachometer
Select to enable/disable the following
items:
• Route guidance to destination (if
equipped)
● Do not place anything on or put
stickers onto the head-up display
projector.
Doing so could interrupt head-up
display indications.
● Do not touch the inside of the head-
up display projector or thrust sharp
edges or the like into the projector.
Doing so could cause mechanical
malfunctions.
Using the head-up display
To Next Page
Loading...
