455
6
6-4. Using the other interior features
Interior features
The USB Type-C charging ports
are used to supply 3 A of electricity
at 5 V to external devices.
The USB Type-C charging ports
are for charging only. They are not
designed for data transfer or other
purposes.
Depending on the external device,
it may not charge properly. Refer to
the manual included with the device
before using a USB charging port.
■ Using the USB Type-C
charging ports
Console box (if equipped)
Rear
Open the lid.
■ The USB Type-C charging ports
can be used when
The power switch is in ACC or ON.
■ Situations in which the USB Type-C
charging ports may not operate
correctly
● If a device which consumes more than
3 A at 5 V is connected
● If a device designed to communicate
with a personal computer, such as a
USB memory device, is connected
● If the connected external device is
turned off (depending on device)
● If the temperature inside the vehicle is
high, such as after the vehicle has
been parked in the sun
■ About connected external devices
Depending on the connected external
device, charging may occasionally be
suspended and then start again. This is
not a malfunction.
■ Appliances that may not operate
properly (220 VAC)
The following 220 VAC appliances
may not operate properly even if their
power consumption is under 150 W.
● Appliances with high initial peak
wattage
● Measuring devices that process
precise data
● Other appliances that require an
extremely stable power supply
USB Type-C charging ports
■ To prevent damage to the USB
Type-C charging ports
● Do not insert foreign objects into
the ports.
● Do not spill water or other liquids
into the ports.
To Next Page
Loading...
