456
6-4. Using the other interior features
A portable device can be charged
by just placing Qi standard wireless
charge compatible portable devices
according to the Wireless Power
Consortium, such as smartphones
and mobile batteries, etc., on the
charge area.
This function cannot be used with
portable devices that are larger
than the charging tray. Also,
depending on the portable device, it
may not operate as normal. Please
read the operation manual for por-
table devices to be used.
■ The “Qi” logo
The “Qi” logo is a trademark of the
Wireless Power Consortium.
■ Name for all parts
Charge area
*
Charging tray
Power supply switch
Operation indicator light
*
: Portable devices and wireless char-
gers contain charging coils. The
charging coil in the wireless charger
can be moved within the charge area
near the center of the charging tray. If
the charging coil inside a portable
device is detected in the charge area,
the charging coil inside the wireless
charger will move toward it and start
charging. If the charging coil inside a
portable device moves outside of the
● When the USB Type-C charging
ports are not in use, close the lids. If
a foreign object or liquid enters a
port may cause a short circuit.
● Do not apply excessive force to or
impact the USB Type-C charging
ports.
● Do not disassemble or modify the
USB Type-C charging ports.
■ To prevent damage to external
devices
● Do not leave external devices in the
vehicle. The temperature inside the
vehicle may become high, resulting
in damage to an external device.
● Do not push down on or apply
unnecessary force to an external
device or the cable of an external
device while it is connected.
■ To prevent 12-volt battery dis-
charge
Do not use the USB Type-C charging
ports for a long period of time when
the hybrid system is off.
Wireless charger (if
equipped)
A
B
C
D
To Next Page
Loading...
