TP-Link AC600 User Guide

3
Chapter 1
Get to Know about Your Adapter
1. 1. Product Overview
TP-Link Wireless USB Adapter connects your computer to a Wi-Fi network for smooth
HD video, voice streaming and online gaming.
• Small, unobtrusive design allows you to plug it in and forget it is even there
• Blazing fast wireless data transmission rates of up to 433Mbps at 5GHz and 200Mbps
at 2.4GHz
• Utilizes 802.11ac standard and is backward compatible with 802.11a/b/g/n
• Supports 256QAM technology, 33% faster on 2.4GHz
• Supports ad-hoc and infrastructure mode
• Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK
• Supports Windows and Mac
1. 2. LED Status
You can check the adapter’s working status by following the LED Explanation table.
Status
Indication
Off
The driver is not installed.
The adapter is not detected.
On The driver has been installed successfully.
Tips:
If the LED is off, try these troubleshooting tips:
1. Check if the adapter is recognized and enabled or not. Refer to Troubleshooting-T2 for detailed instructions.
2. Remove and reinsert the adapter.
3. Reinstall the software, if necessary.

TP-Link AC600 Specifications

General

Interface	USB 2.0
Antenna	Internal
Model	Archer T2U
Wireless Standard	IEEE 802.11ac
Frequency	2.4GHz, 5GHz
Security	WEP, WPA, WPA2
Data Rate	5 GHz: Up to 433 Mbps, 2.4 GHz: Up to 150 Mbps
Operating Systems Supported	Windows 11/10/8.1/8/7/XP, Mac OS X 10.9-10.13