Need help?Do you have a question about the TP-Link AP300 and is the answer not in the manual?
General| Standards | IEEE 802.11a/b/g/n/ac |
|---|---|
| Wireless Speed | 300Mbps at 2.4GHz |
| Frequency | Dual-band (2.4 GHz & 5 GHz) |
| Ports | 1 x Ethernet Port (RJ45) |
| Power Supply | 9VDC |
| Mounting | Wall or ceiling mount |
| Wireless Functions | Enable/Disable Wireless Radio, WMM, Wireless Statistics |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% non-condensing |
Guides users through a step-by-step configuration process for the AP device.
Explains how to use the WPS feature for quick and secure network connection.
Explains how to modify the AP device's IP address and subnet mask.
Details how to configure the DHCP server and manage IP address assignments.
Describes how to allow or block specific devices using MAC addresses.
Guides on downloading and installing the latest firmware for the AP device.
Details how to back up, restore, or reset the AP device's configuration.
To Next Page
