Need help?Do you have a question about the TP-Link AP500 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| Frequency band | 2.4 - 5 GHz |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Receiver sensitivity | 11g 54M: -76dBm@10% PER 11n HT20 MCS7: -73dBm@10% PER 11n HT40 MCS7: -71dBm@10% PER 11a 6Mbps:-94dBm@10% PER 11a 54Mbps: -75dBm@10% PER 11ac HT20 MCS8: -66dBm@10% PER 11ac HT40 MCS9: -62dBm@10% PER 11ac HT80 MCS9: -59dBm@10% PER |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1300 Mbit/s |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Internal | No |
| Placement | Table |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| LED indicators | Power, WPS |
| Cables included | LAN (RJ-45) |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Processor frequency | 1000 MHz |
| Compatible operating systems | Microsoft Windows 98SE / NT / 2000 / XP / Vista / 7 / 8 / 8.1, Mac OS, NetWare, UNIX, Linux |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Antenna features | Detachable antenna |
| Antennas quantity | 3 |
| Package type | Box |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 242 mm |
| Height | 44 mm |
Explains the capabilities and target use cases of the AP device.
Highlights the main wireless and wired performance aspects of the access point.
Guides users in selecting the best mode (AP, Repeater, Client, Multi-SSID) for their network.
Illustrates hardware connections for each supported operating mode.
Step-by-step guide to access and log into the AP's web-based configuration interface.
Facilitates rapid configuration of the AP device through a guided wizard.
Explains using WPS push button and PIN methods for wireless device connectivity.
Covers manual setup of SSID, security, and mode settings for wireless connections.
Instructions for setting the AP device's IP address, subnet mask, and default gateway.
Guidance on configuring the DHCP server, IP address pool, and lease times.
How to implement MAC filtering to permit or deny network access based on device MAC addresses.
Instructions for downloading and applying the latest firmware to the AP device.
Steps to save current settings, restore from backup, or reset to factory defaults.
To Next Page