EasyManuals Logo

TP-Link AP500 User Manual

TP-Link AP500
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
6
Chapter 1
Item Description
Ethernet One LAN 10/100/1000Mbps Auto-Negotiation RJ45 Port connects to a network device.
Reset
The switch for the reset function. With the device powered on, use a pin to press and
hold the Reset button for five seconds until the Power LED starts blinking, then release
the button.
WPS
Press and hold this button for two seconds to enable the WPS function. When the WPS
LED blinks slowly, the device is trying to connect or to be connected.
LED Press this button to turn on or turn off the LEDs.
On/Off The switch for the power. Press it to power on or off the AP device.
Power
The power port connects to the provided power adapter.
Antennas
Used for wireless operation and data transmit. Upright them for the best Wi-Fi
performance.
1. 4. Position Your AP Device
Place your AP device in a well-ventilated place far from any heater or heating vent
Avoid direct irradiation of any strong light (such as sunlight)
Keep at least 2 inches (5 cm) of clear space around your AP device
Operating Temperature: 0~40 (32~104℉)
Operating Humidity: 10%~90%RH, Non-condensing
Generally, your AP device is placed on a horizontal surface. It also can be mounted on
the wall as shown below.
Note:
The diameter of the screw, 4mm<D<7mm, and the distance of two screws is 55.43mm. The screw that projects from
the wall needs around 3.5mm based, and the length of the screw need to be at least 20mm to withstand the weight
of the product.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link AP500 and is the answer not in the manual?

TP-Link AP500 Specifications

General IconGeneral
2.4 GHzYes
Frequency band2.4 - 5 GHz
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity11g 54M: -76dBm@10% PER 11n HT20 MCS7: -73dBm@10% PER 11n HT40 MCS7: -71dBm@10% PER 11a 6Mbps:-94dBm@10% PER 11a 54Mbps: -75dBm@10% PER 11ac HT20 MCS8: -66dBm@10% PER 11ac HT40 MCS9: -62dBm@10% PER 11ac HT80 MCS9: -59dBm@10% PER
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1300 Mbit/s
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
InternalNo
PlacementTable
CertificationCE, FCC, RoHS
Product colorBlack
LED indicatorsPower, WPS
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Processor frequency1000 MHz
Compatible operating systemsMicrosoft Windows 98SE / NT / 2000 / XP / Vista / 7 / 8 / 8.1, Mac OS, NetWare, UNIX, Linux
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Antenna featuresDetachable antenna
Antennas quantity3
Package typeBox
Weight and Dimensions IconWeight and Dimensions
Depth162 mm
Width242 mm
Height44 mm

Related product manuals