73
Chapter 12
Customize Your Network Settings
1. Tick the Enable DHCP Server checkbox.
2. Enter the starting and ending IP addresses in the IP Address Pool.
3.
Enter other parameters if the ISP offers. The Default Gateway is automatically filled in
and is the same as the L
AN IP address of the router.
4. Click Save.
¾ T
o reserve an IP address for a specified client device:
1. Click Add in the Address Reservation section.
2. Click View Existing Devices or enter the MAC address of the client device.
3. Enter the IP address to reserve for the client device.
4. Ent
er the Description for this entry.
5. Tick
the Enable This Entry checkbox and click OK.
To Next Page
Loading...
