EasyManua.ls Logo

TP-Link Archer AC2600 - USB Settings; Access the USB Storage Device; Media Sharing

TP-Link Archer AC2600
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Chapter 1
Get to Know About Your Router
Name Status Indication
(Wireless
2.4GHz)
On The 2.4GHz wireless band is working properly.
Off The 2.4GHz wireless band is disabled.
(Wireless
5GHz)
On The 5GHz band wireless is working properly.
Off The 5GHz wireless band is disabled.
(Internet)
White Internet service is available.
Orange
The Internet port is connected, but internet service is not
available.
Off The Internet port is not connected.
(LAN)
On At least one LAN port is connected to a powered-on device.
Off No LAN port is connected to a powered-on device.
(WPS)
On A WPS connection is established.
Flashing
WPS connection is in progress. This may take up to 2
minutes.
Off
A WPS connection has been established for more than 5
minutes or WPS connection failed.
(USB 3.0)
On
The USB device connected to the USB 3.0 port is ready to
use.
Flashing
The USB device connected to the USB 3.0 port is being
identified.
Off
No USB device is plugged into the USB 3.0 port or the
USB device is not identified or USB device has been safely
ejected.
(USB 2.0)
On
The USB device connected to the USB 2.0 port is ready to
use.
Flashing
The USB device connected to the USB 2.0 port is being
identified.
Off
No USB device is plugged into the USB 2.0 port or the
USB device is not identified or USB device has been safely
ejected.

Table of Contents

Related product manuals