WPA-PSK: Pre-shared key of WPA.
WPA2-PSK: Pre-shared key of WPA2.
Encryption:
Select the encryption type, including Auto, TKIP, and AES. The default setting
is Auto, which can select TKIP (Temporal Key Integrity Protocol) or AES
(Advanced Encryption Standard) automatically based on the wireless station's
capability and request. AES is more secure than TKIP and TKIP is not supported
in 802.11n mode. It is recommended to select AES as the encryption type.
RADIUS Server
IP/Port:
Enter the IP address/port of the RADIUS server.
RADIUS
Password:
Enter the shared secret of RADIUS server to access the RADIUS server.
Group Key
Update period:
Specify the group key update period in seconds. The value can be either 0 or
30-8640000 seconds.
NOTE:
Encryption type TKIP is not supported in 802.11n mode. If TKIP is applied in 802.11n mode, the
clients may not be able to access the wireless network of the EAP. If TKIP is applied in 11b/g/n
mode (in the 2.4GHz frequency band) or 11a/n (in the 5GHz frequency band), the device may work
at a low transmission rate.
WPA-PSK
Based on pre-shared key, security mode WPA -PSK is characterized by high security and simple
configuration, which suits for common households and small business. WPA-PSK has two
versions: WPA -PSK and WPA2-PSK.
Figure 5-7 Security Mode_WPA-PSK
Version:
Auto: Select WPA or WPA2 automatically based on
capability and request.
WPA: Pre-shared key of WPA.
WPA2: Pre-shared key of WPA2.
11
To Next Page
Loading...
Need help?
General
