Quick Start Guide (CPE and WBS) Set Up the Wireless Network
Configuration Guide
18
Note:
There may be two or more networks with the same SSID in the AP list. Click
Lock to AP
to select the
SSID and AP simultaneously, which can make the device connect to the specific AP next time.
Figure 3-19 Selecting an Upstream Wireless Network
5) In the Wireless Client Settings section, specify the wireless parameters to connect to
the specified wireless network. Click
Next
.
Note:
Make sure that the
Security
and
PSK Password
are the same as the upstream wireless network’s.
Other parameters set in this page and those of the upstream wireless network should be compatible
with each other. For details, refer to
Configure the Wireless Parameters
.
To Next Page
Loading...
