3
4. Launch a web browser on the client device and enter http://tplinkeap.net in the
address bar to load the login page of the EAP. Use admin for both of the username
and password to log in.
Tips:
If you cannot log in to the EAP via the domain name, try the operations below for
troubleshooting:
• Clear the browser cache or use anther browser to log in again.
• Go to the wireless setting of your wireless client device and turn off the Wi-Fi
button. Then turn it on and connect the network again. Or you can reboot the EAP
device.
• If you know the IP address of the EAP, you can login to the EAP via the IP address.
For the detailed steps, refer to
Method 2: Log in via the IP Address of the EAP
To Next Page
Loading...
