Need help?Do you have a question about the TP-Link EAP650-Outdoor and is the answer not in the manual?
Covers network topologies for managed mode, including software and hardware controllers.
Illustrates the network setup for standalone mode.
Describes powering the device using a PoE switch.
Describes powering the device using a PoE adapter.
Details attaching the device to a pole, aligning it for orientation.
Describes mounting the device bracket to a wall and locking it into place.
Explains fitting the Ethernet cable through the seal, bracket, and O-ring.
Covers network topologies for managed mode, including software and hardware controllers.
Illustrates the network setup for standalone mode.
Describes powering the device using a PoE switch.
Describes powering the device using a PoE adapter.
Details attaching the device to a pole, aligning it for orientation.
Describes mounting the device bracket to a wall and locking it into place.
Explains fitting the Ethernet cable through the seal, bracket, and O-ring.
General| Wireless Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| Maximum Wireless Speed | Up to 3000 Mbps |
| Antenna Gain (2.4 GHz) | 4 dBi |
| Antenna Gain (5 GHz) | 5 dBi |
| Ingress Protection | IP67 |
| Wireless Speed (5 GHz) | 2402 Mbps |
| Wireless Speed (2.4 GHz) | 574 Mbps |
| Antenna Type | Internal |
| Ports | 1 x Gigabit Ethernet |
| Power over Ethernet | 802.3at PoE |
| Operating Temperature | -30°C to 60°C |
| Mounting Options | Wall or Pole |
| Security | WPA3, WPA2 |
To Next Page