TP-Link Gigabit Easy Smart - Page 5

Standard
IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE 802.3at, IEEE802.3x, IEEE802.1p,
IEEE802.1q For TL-SG1210MPE: IEEE802.3z
Interface
For TL-SG105PE/TL-SG108PE:
5/8 10/100/1000 Mbps RJ45 Ports
Auto-Negotiation, Auto MDI/MDIX
PoE Ports: Port 1– Port 4
For TL-SG1210MPE: 9 10/100/1000 Mbps RJ45 Ports
Auto-Negotiation, Auto MDI/MDIX
1 1000 Mbps SFP port
PoE Ports: Port 1-Port 8
Data Transfer Rate
Ethernet: 10 Mbps (Half Duplex), 20 Mbps (Full Duplex) Fast Ethernet: 100 Mbps (Half Duplex),
200 Mbps (Full Duplex)
Gigabit Ethernet: 2000 Mbps (Full Duplex)
Network Media (Cable)
10Base-T: UTP category 3, 4, 5 cable (maximum 100 m) EIA/TIA-568 100 Ω STP (maximum
100 m)
100Base-TX: UTP category 5, 5e cable (maximum 100 m) EIA/TIA-568 100 Ω STP (maximum
100 m)
1000Base-T: UTP category 5e cable or above (maximum 100 m) EIA/TIA-568 100 Ω STP
(maximum 100 m)
1000BASE-SX/LX/LX10/BX10: MMF, SMF (Only for TL-SG1210MPE)
Power Supply
External Power Adapter
Input: 100-240 V AC, 50/60 Hz
Output: 53.5 V DC/2.43 A (For TL-SG1210MPE)
53.5 V DC/1.31 A (For TL-SG105PE/TL-SG108PE)
Switching Capacity
TL-SG105PE: 10 Gbps
TL-SG108PE: 16 Gbps
TL-SG1210MPE: 20 Gbps
MAC Address Table
TL-SG105PE: 2K, automatically learning, automatically aging
TL-SG108PE/TL-SG1210MPE: 4K, automatically learning, automatically aging
Wall Mountable Yes
Distance Between
Mounting Holes
TL-SG105PE: 39 mm
TL-SG108PE: 94 mm
TL-SG1210MPE: 150 mm