98
5 ) Right click Wireless Zero Configuration, and then select Properties.
6 ) Change
Startup type to Automatic, click on Start button and make sure the
Service status is
Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless AP/modem.
• Make sure your computer/device is still in the range of your AP/modem. Move it closer
if it is currently too far away.
• Go to
Advanced > Wireless > Wireless Settings, and check the wireless settings.
Double check your Wireless Network Name and SSID is not hidden.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key, usually you can only find it on the
label of your router.
To Next Page
Loading...
