99
2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a
security key instead
, and then type in the Wireless Password/Network Security
Key
.
3 ) If it continues to show note of
Network Security Key Mismatch, it is suggested
to confirm the wireless password of your wireless AP.
Note: Wireless Password/Network Security Key is case sensitive.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than
usual to connect to this network:
• Check the wireless signal strength of your network. If it is weak (1~3 bars),
please move the AP closer and try again.
• Change the wireless Channel of the AP to 1, 6 or 11 to reduce interference from
other networks.
• Re-install or update the driver for your wireless adapter of the computer.
Q6. What should I do if the agent’s status LED remains flashing red?
• Place the agent close to the Main AP until the status LED turns solid blue or white,
then relocate the agent.
• Reset the agent and try to synchronize the agent with the Main AP again.
To Next Page
Loading...
