NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
17
Wireless Network Name: Displays the wireless network’s name. Make sure the camera and
your PC connect to the same wireless network, otherwise your PC can't access the camera.
Signal: Displays the strength of the wireless signal.
Security: Displays the wireless network’s security mode.
MAC Address: Displays the MAC address of the router.
To connect your camera to a wireless network, follow the steps below:
1. Click Scan to get and refresh the Wireless Network List.
2. Select a wireless network from the wireless network list.
3. If the wireless network’s security mode is None, simply click Connect. If the security mode
requires a password, enter the wireless network’s password and then click Connect. You can
select show password to display what you’ve entered.
To Next Page
Loading...
