TP-Link NC450 - Chapter 3 Set Up Your Camera; 3.1 Set up the Camera with the tpCamera APP

NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
5
Chapter 3 Set Up Your Camera
3.1 Set up the Camera with the tpCamera APP
Step 1. Connect the camera to the network your smartphone is on.
1) Power on the camera using the provided power adapter as shown.
2) Connect a smartphone to the router as shown.
3) Connect the camera to the router via wired or wireless connection, and then wait till the
camera’s system LED become solid green.
Wired: Connect the camera to the router’s LAN port via an Ethernet cable or the provided
passive POE injector.
 Via an Ethernet cable
Smartphone Camera Outlet
W
ireless Route
r
LANWAN
Internet
 Via the provided passive POE injector
Smartphone Camera
Outlet
Wireless Router Passive POE Injector
LANWAN
Internet