TP-Link NC450 - 4.3.5 Basic > LED

NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision
19
2. To add a camera to your TP-LINK Cloud account, make sure that the camera is connected to
the Internet.
Add Your Camera to TP-LINK Cloud Account
If you already have a TP-LINK Cloud account, to add your camera to your account, just enter the
TP-LINK Cloud account and password, and then click Register.
 Account: Enter your TP-LINK Cloud account, either E-mail address or username is allowed.
 Password: Enter your TP-LINK Cloud account’s password.
 Camera Name: The default value is the camera model. You can change it to an
easy-to-remember one. Camera name can contain up to 31 characters. It cannot contain the
following characters: \ / : = & ‘ “ < > { }.
After your camera is registered successfully, you can go to http://www.tplinkcloud.com
to view it.
4.3.5 Basic > LED
The camera’s LED is on by default. If you want to turn it off, select Off and click Save.