TP-Link RE705X - Set up the Extender as an Access Point

33
Chapter 6 Use Your Extender as an Access Point
The extender can work as an access point, transforming your existing wired network to
a wireless one.
6. 1. Set Up the Extender as an Access Point
1. Visit http://www.tplinkrepeater.net, and log in with your TP-Link ID or the password
you set for the extender.
2. Click Mode in the top right corner of the page. Select Access Point and click Save.
The extender will reboot and switch to Access Point mode.
3. Visit http://www.tplinkrepeater.net, and log in with your TP-Link ID or the password
you set for the extender.
4. Go to Quick Setup to configure your extender.
1 ) Configure your wireless settings and click Next.