300Mbps Wireless N DOCSIS 3.0
Cable Modem Router
TC-W7960
Connect the Hardware
1 Connect the coaxial cable and power adapter to the modem router, then power on your modem
router.
2 Wait for about 1 minute until the following LEDs are solid on.
Notes:
1. Keep the power on at all times during this process.
2. If the Internet LED is blinking or off, please call your Internet service provider’s customer
service.
3. If the wireless LED is o, please press the WiFi button on the front panel, then check the
LEDs again.
3 Connect your computer to the modem router via a wired or wireless connection.
Wired: Connect the computer to the modem router’s LAN port via an Ethernet cable.
Wireless: On your computer, select and connect to the modem router’s wireless network.
The default wireless network name (SSID) and password are on the provided Information Card.
Or you can set up a connection via the WPS button , which is on the front panel of the modem
router. For more information about WPS, refer to the User Guide at www.tp-link.com.
To Next Page
Loading...
